16
CONTROL PANEL: (Con’t)
SET
CAL
CO2
TEMP
DOOR
SCAN
ºC
%CO2
HEAT
HOLD
HI LIMIT SAMPLE
1
2
3
4
5
6
7
8
9
10 11
12
6.
DOOR HEAT COMMAND KEY:
•
When
the
SET
key is pressed followed by the
DOOR-HEAT
key, the
level of heat can be entered with the Up and Down keys as a
percentage value being applied to the inner glass door.
•
A
flashing
DOOR-HEAT
indicator light above the key indicates that
heat is being applied to the inner glass door.
•
A good starting point for the door heat control is 35%; if fogging still
occurs, increase in 10% increments until fogging disappears.
7.
SCAN/HOLD COMMAND KEY: Permits holding the value of a single
parameter for continued viewing or scans alternately between the values
of the two parameters on a 2-second interval.
8.
DOWN-ARROW KEY: This key decreases numerical value of the
parameter which has been accessed.
9.
UP-ARROW KEY: This key increases the numerical value of the
parameter that has been accessed.
NOTE:
A 5 SECOND DELAY AFTER ANY FINAL ENTRY RESULTS IN
AUTOMATIC ENTRY
OF THAT CHANGE.
FEATURES:
(Con’t)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
