33
INSTALLATION:
(Con’t)
460 SERIES:
NOTE:
PUSH THE QUICK-CONNECT ON THE WATER INLET UNTIL IT CLICKS
BEFORE INSERTING TUBING TO INSURE A SECURE CONNECTION. THE
SMALL QUICK-CONNECT RESET BUTTON ON THE LEFT SIDE OF THE
WATER INLET CAN BE PUSHED IF THE WATER INLET WAS
INADVERTENTLY SET.
QUICK-CONNECT RESET BUTTON
QUICK-CONNECT
CAUTION:
TO PREVENT DAMAGE TO THE WATER CHAMBER, DO NOT
ADD WATER AT A HIGH FLOW RATE OR AT A HIGH PRESSURE.
WATER OVERFLOW OUTLET:
•
Connect appropriate-sized tubing from the water flow outlet (circled) to a
sink, floor drain or in an adequately sized receptacle (bucket, large pan).
BE ADVISED:
IT IS RECOMMENDED THAT WHEN FILLING THE UNIT IT
SHOULD NOT BE LEFT UNATTENDED. A SURPRISING LARGE AMOUNT
OF WATER CAN RUN FROM THE WATER OVERFLOW OUTLET WITHIN A
FEW SECONDS AFTER FILLING.
UNIT REAR PANEL: WATER OVERFLOW OUTLET (CIRCLED)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
