Barnett Engineering ProTalk LINK, Руководство по эксплуатации

Страница: 57 / 81

SPECIFICATIONS PAGE 53
12.3 Common alarm specifications
Alarm Name: Alarm name contains up to 16 characters to describe the
alarm. The name is not used in voice announcements,
but is used for messages sent by email, SMS text, in the
Monitor operation (that can be accessed by connecting
to the main module with this application), or through the
internet if a PLC module is in the system. Normally the
Alarm Name will be the same or similar to the voice
message for this point.
Using Group:
To enable the alarm it has to be put into one of the 8
groups. Note that the Group that the alarm is assigned
to must also be enabled for alarm reporting.
DTMF TX Code: If one or more DTMF digits are entered in Alarm On
Code, they will be transmitted when a SIGNAL
command in a directory is encountered. A string of up
to 7 digits is allowed.
Alarm Format:
When Alarm Format is set for latched, the alarm
condition will remain, even if the input state returns to
normal and can only be cleared when it has been
annunciated and acknowledged. In the case of an analog
input, the first alarm condition that occurs is the one that
is latched. This means that if a high alarm state is
encountered, it will be latched and remain there even if
the reading drops and goes into the low alarm state.