Barnett Engineering ProTalk LINK, Руководство по эксплуатации

Страница: 54 / 81

PAGE 50 SPECIFICATIONS
Relay Failure - when the contact position does not
match the coil setting.
Roaming - indicates abnormal phone behavior since
the Link is presumably installed at a fixed location.
Unknown Cell Status - failure to obtain network
connection so there can be no callout actions.
Low RSSI - insufficient signal strength to reliably
operate the cell phone.
APN server: Access Point Name server. Rogers access point to
obtain an IP address and establish connection to the
internet. For Rogers in Canada the default is "vpn.com".
APN user: Access Point Name user. For Rogers in Canada the
default is "wapuser1".
APN password: Access Point Name password. For Rogers in Canada
the default is "wap".
SMTP server: Rogers wireless email server. For Rogers in Canada the
default is "smtp.rogerswirelessdata.com".
APN SMTP
server:
Required to use the SMTP server. For Rogers in Canada
the default is "internet.com".
Account address: This will appear in the "From:" portion of an outgoing
email. It is the address where the outgoing email
containing the current IP address of the wireless port is
sent for a data transfer session.
example: From: your.name@yourcompany.com
11.2.8 W2 module
Digital Inputs: 8 total, ground closure operation
Internally pulled up to +5 VDC
1 M ohm input impedance
Programmable as standard digital, watchdog, pulse
width, totalizer or accumulator types
Relay Outputs: 4 total, form C, 2A at 30 VDC
Programmable as on/off or timed
Latching coils, can be programmed to maintain previous
state on power-up
Antenna port: 50 ohms, SMA female