Barnett Engineering ProTalk LINK, Руководство по эксплуатации

Страница: 44 / 81

PAGE 40 W3 INSTALLATION
SIM Card Installation
The B1285-W3 utilizes an embedded HSPA cell phone module to make
calls. To operate on a wireless network, a valid SIM card (Subscriber
Identity Module) must be obtained from your carrier and installed in this
module. The SIM cardholder is located on the front of the case.
It is
important to observe proper electrostatic grounding precautions and to
disconnect power prior to performing this procedure.
What you’ll need:

Fine point object (eg. paper clip)

Active SIM card
Installation Steps:

Use a fine point object to depress the yellow eject button.

Remove the small black holder and place the SIM card in the
holder taking note of the keyed pad.

Return the holder with the SIM card through the slot in the front
of the case.