page 96
page 96
page 96
page 96
page 96
475 A CRL
800-00167
1
11
11 REMOVE THE
REMOVE THE
REMOVE THE
REMOVE THE
REMOVE THE
OLD ELEMENT
OLD ELEMENT
OLD ELEMENT
OLD ELEMENT
OLD ELEMENT
AS GENTLY
AS GENTLY
AS GENTLY
AS GENTLY
AS GENTLY
AS POSSIBLE
AS POSSIBLE
AS POSSIBLE
AS POSSIBLE
AS POSSIBLE
Loosen wing nut and remove old element. Baby
that dirty element until you get it clear out of the
housing. Accidentally bumping it while still inside
means dropped dirt and dust that may contaminate
the clean side of your filter housing, before the new
filter element has a chance to do its job.
2
22
22 ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
THE INSIDE OF
THE INSIDE OF
THE INSIDE OF
THE INSIDE OF
THE INSIDE OF
THE HOUSING
THE HOUSING
THE HOUSING
THE HOUSING
THE HOUSING
CAREFULLY
CAREFULLY
CAREFULLY
CAREFULLY
CAREFULLY
Dirt left in the air cleaner housing spells death
for your engine. Use a clean, damp cloth to
wipe every surface clean. Check it visually to
make sure it's clean before putting in a new
element.
3
33
33 ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
ALWAYS CLEAN
THE GASKET
THE GASKET
THE GASKET
THE GASKET
THE GASKET
SEALING
SEALING
SEALING
SEALING
SEALING
SURFACES OF
SURFACES OF
SURFACES OF
SURFACES OF
SURFACES OF
THE HOUSING
THE HOUSING
THE HOUSING
THE HOUSING
THE HOUSING
An improper gasket seal is one of the most
common causes of engine contamination. Make
sure that all hardenend dirt ridges are completely
removed, both on the bottom and top of the
cleaner.
4
44
44 CHECK FOR
CHECK FOR
CHECK FOR
CHECK FOR
CHECK FOR
UNEVEN DIRT
UNEVEN DIRT
UNEVEN DIRT
UNEVEN DIRT
UNEVEN DIRT
PATTERNS ON
PATTERNS ON
PATTERNS ON
PATTERNS ON
PATTERNS ON
YOUR ELEMENT
YOUR ELEMENT
YOUR ELEMENT
YOUR ELEMENT
YOUR ELEMENT
Your old element is a valuable clue to dust
leakage or gasket sealing problems. A pattern
on the element clean side is a sign that the old
element was not firmly sealed or that a dust
leak exists. Make certain the cause of that leak
is identified and rectified before replacing the
element.
5
55
55 PRESS YOUR
PRESS YOUR
PRESS YOUR
PRESS YOUR
PRESS YOUR
FRESH GASKET
FRESH GASKET
FRESH GASKET
FRESH GASKET
FRESH GASKET
TO SEE IF IT
TO SEE IF IT
TO SEE IF IT
TO SEE IF IT
TO SEE IF IT
SPRINGS BACK
SPRINGS BACK
SPRINGS BACK
SPRINGS BACK
SPRINGS BACK
Make sure your new element is made with a
highly compressible gasket that springs
right back when your finger pressure is released. A
quality gasket is one of the most important parts of
the element.
6
66
66 MAKE SURE THE
MAKE SURE THE
MAKE SURE THE
MAKE SURE THE
MAKE SURE THE
GASKET IS
GASKET IS
GASKET IS
GASKET IS
GASKET IS
SEATING EVENLY
SEATING EVENLY
SEATING EVENLY
SEATING EVENLY
SEATING EVENLY
If you don't feel the gasket is seating evenly for
a perfect seal, you don't have protection.
Recheck to see if the sealing surface in the
housing is clean, or if the element is the correct
model number. It may be too short for the
housing.
7
77
77 REINSTALL DUST
REINSTALL DUST
REINSTALL DUST
REINSTALL DUST
REINSTALL DUST
CUP
CUP
CUP
CUP
CUP
Be sure the dust cup seals 360 degrees around
the air cleaner body and the directional arrows
are pointing up.
8
88
88 CHECK
CHECK
CHECK
CHECK
CHECK
CONNECTIONS
CONNECTIONS
CONNECTIONS
CONNECTIONS
CONNECTIONS
& DUCTS FOR
& DUCTS FOR
& DUCTS FOR
& DUCTS FOR
& DUCTS FOR
AIR TIGHT FIT
AIR TIGHT FIT
AIR TIGHT FIT
AIR TIGHT FIT
AIR TIGHT FIT
Check that all clamps and flange joints are
tight, as well as cleaner mounting bolts. Seal
any leaks immediately - they mean dirt is
directly entering your engine. All duct joints,
from air cleaner to engine, must be tight.
9
99
99 RESET THE
RESET THE
RESET THE
RESET THE
RESET THE
RESTRICTION
RESTRICTION
RESTRICTION
RESTRICTION
RESTRICTION
INDICATOR
INDICATOR
INDICATOR
INDICATOR
INDICATOR
If air cleaner is equipped with a restriction
indicator, reset it to the green zone.
AIR CLEANER MAINTENANCE CONTINUED...
IMPORTANT STEPS TO FOLLOW EVERY TIME AN AIR
IMPORTANT STEPS TO FOLLOW EVERY TIME AN AIR
IMPORTANT STEPS TO FOLLOW EVERY TIME AN AIR
IMPORTANT STEPS TO FOLLOW EVERY TIME AN AIR
IMPORTANT STEPS TO FOLLOW EVERY TIME AN AIR
CLEANER ELEMENT IS REPLACED:
CLEANER ELEMENT IS REPLACED:
CLEANER ELEMENT IS REPLACED:
CLEANER ELEMENT IS REPLACED:
CLEANER ELEMENT IS REPLACED:
