Bard FUSION-TEC WR Series, Сборник литературы

Страница: 5 / 102

Manual 2100-704C
Page 3 of 47
Figure 42 Clearing Unit Alarm Logs ................... 39
Figure 43 Setting Controller Date and Time ........ 40
Figure 44 LC6000 Controller Display/Interface ... 40
Figure 45 Enable/Disable Zone 1 Indoor
Humidity Sensor ............................... 41
Figure 46 Enable/Disable Zone 2 Indoor
Humidity Sensor ............................... 41
Figure 47 Enable/Disable Zone 3 Indoor
Humidity Sensor ............................... 41
Figure 48 Enable/Disable Zone 1 Indoor
Temperature Sensor .......................... 41
Figure 49 Enable/Disable Zone 1 Remote
Temperature Sensor .......................... 42
Figure 50 Enable/Disable Zone 2 Remote
Temperature Sensor .......................... 42
Figure 51 Enable/Disable Zone 3 Remote
Temperature Sensor .......................... 42
Figure 52 Enable/Disable Outdoor Air Humidity
Sensor ............................................. 43
Figure 53 Enable/Disable Outdoor Air
Temperature Sensor .......................... 43
Figure 54 Total Units Displayed ........................ 43
Figure 55 Selecting Economizer Type ................ 44
Figure 56 Clearing LC6000 Alarm Logs ............. 44
Figure 57 Adjusting Sensor Offset Value ............ 45
Figure 58 Current Sensor Orientation ................ 47
Figure 59 Earlier Sensor Orientation .................. 47
TABLES
Table 1 Clearance Required for Service Access
and Adequate Condenser Airflow .......... 8
Table 2 Minimum Clearance Required to
Combustible Materials ......................... 8
Table 3 Electrical Specifications .................... 18
Table 4 LC6000-200 Terminal Block Index .... 35
Table 5 LC6000/TEC-EYE Passwords (Default) 45
Table 6 WR Series Unit Status Messages ........ 46
Table 7 LC6000 Status Messages .................. 46
Electrical shock hazard.
Have a properly trained individual perform
these tasks.
Failure to do so could result in electric shock
or death.
!
WARNING
Fire hazard.
Maintain minimum 1/4" clearance between the
supply flange and combustible materials.
Failure to do so could result in fire causing
damage, injury or death.
!
WARNING
Heavy item hazard.
Use more than one person to handle unit.
Failure to do so could result in unit damage or
serious injury.
!
WARNING
Cut hazard.
Wear gloves to avoid contact with sharp
edges.
Failure to do so could result in personal injury.
!
CAUTION