Bard FUSION-TEC WR Series, Сборник литературы

Страница: 32 / 102

Manual 2100-704C
Page 30 of 47
FIGURE 28
Placement of Communication Wire Filters (Daisy Chain and Alternate Methods)
LC6000
Place filter here
Daisy Chain Wiring (up to 14 units)
Alternate Wiring (up to 14 units)
Unit 1 Unit 2 Unit 3 Unit 4...up to
14 units
Place filter here
Unit 1 Unit 2 Unit 3 Unit 4...up to
14 units
Place filter here
Place filter here
NOTE: Line filters can be on either the unit or controller, whichever device is on the end of the chain. No matter
how many units there are, the two end devices will only have ONE communication cable, whereas the
center devices will all have TWO (as shown above). Maximum two wires in each terminal. Filters go inside
the unit or controller; shown out of unit above for identification only.
LC6000