![background image](http://html1.mh-extra.com/html/barco/ulc-30a/ulc-30a_service-manual_3812456055.webp)
9. Secondary cooling unit
9.2
Installing the Secondary cooling unit
Necessary tools
•
Allen wrench 4 mm
•
Wire cutters
•
Cable ties
This procedure assumes that power has been switched off. Unless otherwise stated, power must be off prior
to start with this procedure. To switch off power, see procedure "Switching off power and locking the switch",
page 15.
For a
fi
rst time installation of the Secondary cooling unit, see installation manual of the ULC-30A chiller.
How to install the Secondary cooling unit?
1. Remove the Fan unit. See procedure "Removal of the fan unit", page 21.
2. Remove the
fi
ve screws and the washers (image 9-13 and image 9-14).
3. Mount the Secondary cooling unit.
Image 9-12
Installing Secondary cooling unit
Note:
Ensure the rear support of the DMD slides into the dedicated groove of the chiller frame.
4. Install the
fi
ve screws (reference 1 image 9-13 & image 9-14) and two washers (reference 2 image 9-14) to .
1
1
1
Image 9-13
Installing three screws
2
1
2
1
Image 9-14
Installing two screws
5. Connect the two hoses onto the Secondary cooling unit.
R5906015 ULC-30A 01/02/2018
51
Содержание ULC-30A
