Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
_________________________________________________________________________
2-10
After removing the sheet you see the transportation lock. It is also fixed with the screws [1] and [2] which you
removed already one step before. Therefore this sheet is now not fixed and you simply can take it out.
Before closing the housing transportation lock, air baffle and elastic hold-down must be readjusted. Therefore
first insert the transportation lock, then turn in the screws [1] and [2] just a little but do not tighten them. Push
the plate as far towards the cards as possible. Then place the air baffle with elastic hold-down on its location.
Take care that the transportation lock remains in its position close to the expansion cards; then turn in the screws
[3] and [4] to the elastic hold-down. After that, tighten the screws [1] and [2].
The air baffle is required to provide sufficient cooling for the device. Don’t forget to readjust
it.
1
2
7
1, 2
place for fixation screws of transportation lock and air baffle
7
transportation lock
Figure 2-13
Transportation lock of the O
MNI
B
US
A12
