![background image](http://html.mh-extra.com/html/barco/rlm-w8/rlm-w8_user-manual_474342053.webp)
53
6
OSD Menu description
Network
To control the projector via network, after connecting the network cables for a PC and the
projector, you can use this OSD function to view the relevant network information (such as IP
Address, Subnet Mask, Gateway and DHCP) of the projector. Please configure the PC to be
connected to the projector with a proper IP address with the same subnet mask, gateway as
the projector. The default IP address of the projector is 192.168.0.100. The network settings
of the projector can only be changed through the web-page control or projector Toolset
application.
To control the projector via network, please connect to the projector via a web browser with
the IP address shown on the OSD menu CONTROL -> Network. The home page will be
displayed as follows.
Menu Position
You can use this function to designate which area on the image the OSD Menu will appear.
As you can see from the diagram below, there are five positions where you can choose to
have the OSD Menu displayed.The default setting is “Center”.
Top Left
Center
Bottom Left
Top Right
Bottom Right
Start Up Logo
You can use this function to have the projector display the Barco logo in the start up screen.
Set
On
to display the Barco logo during start up and
Off
to display a blank image.