![background image](http://html.mh-extra.com/html/barco/rlm-w8/rlm-w8_user-manual_474342005.webp)
5
Hg
For more information, please contact Electronic Industries Alliance (WWW.EIAE.
ORG).
For information on proper lamp handling, visit WWW.LAMPRECYCLE.ORG.
Warning and Safety Instructions
Special Care for Laser Beams!
Special care should be considered when DLP projectors and high power laser equipment are
used in the same room as.
Direct or indirect hit of a laser beam on to the projector lens can severely damage the Digital
Mirror Devices (DMD™).
Sun light Warning
Avoid using the RLM W8 in direct sun light.
Sun light on the projector lens can severely damage the Digital Mirror Devices (DMD™).
Never look into the projector light source directly
This equipment contains a high brightness light source and a portion
of the light emitted by the projector is ultraviolet light. Never look into
the projector light source directly and pay special attention to prevent
children from looking into the projector light source as it can damage
their eyes.
AVOID EYE CONTACT TO THE LIGHT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an arrowhead within a triangle
is intended to tell the user that inside this product
may cause risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell
the user that important operating and/or servicing instructions
are included in the technical documentation for this equipment.
CAUTION / TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Do not turn off the projector by unplugging the power cord.
Under normal operations, be sure to use the SOFT POWER button to turn off the projector as
the internal cooling fans will remain working for approximately 90 seconds after the projector
has been turned off for the shutdown proccess to be completed. And as such, avoid shutting
off AC power to turn off the projector since it could lead to lamp malfunctioning or damage.
Electric shock
To protect your projector, avoid turning on the projector during lightning storms and unplug it
from the wall outlet. This will prevent sudden electrical surges caused by the lightning from
damaging the projector.
Warning, Notices and Safety Instructions
1