![background image](http://html.mh-extra.com/html/barco/rlm-w8/rlm-w8_user-manual_474342006.webp)
6
Do not overload wall outlets/extension cords
Pay attention to the current load of the outlet you are using, be it wall outlet or extension cord
outlet to prevent fire or electric shock.
Cleaning
When cleaning the projector, be sure to unplug it from the wall outlet to prevent electric
shock.
Do not use liquid or aerosol cleaners. Use a dry/damp cloth with excessive moisture removed
for cleaning. Be sure to use cleaning cloth designed to clean monitors for the projector to
prevent damages to the projector casing due to abrasion.
Dampness, smoke, steam, dust, high temperature and direct
exposure to sunlight
Do not operate the projector in environments where it could be expose to dampness, smoke,
steam, dust, high temperature or direct sunlight.For example: bathroom, kitchen, adjacent to
washing machine, damp basement rooms, electric heaters or similar environments.Keeping
or operating the projector in the above-mentioned environment could lead to discoloration,
mold formation, grease or damages to the projector.
Ventilation
The projector case is designed with slots and openings to remove the heat inside the
projector so that it will not overheat and damage the components.Be sure to operate the
projector in an environment with ideal ventilation and don't operate it on a sofa, rug or other
closed-in environments that could obstruct ventilation.
Intrusion of foreign objects
Be sure to keep all foreign objects away from entering the projector because it could be
exposed to hazardous voltages and cause parts to short circuit. This could in turn lead to fire
hazard or electric shock.Examples of foreign objects include: cockroach, screws, liquid and
so forth.
In addition, never spill liquid into the projector.
Carrying the projector
When moving the projector on a cart, be sure to handle the cart with care
as abrupt stops, jolts of excessive force or uneven ground could lead the projector
to topple.
Please install the projector on an even and stable surface
Avoid placing the projector on unstable cart, tripod, table and so forth to prevent the projector
from falling, becoming damaged or causing injuries.
Servicing
Should you encounter problem with the projector, please seek assistance from your local
dealer or qualified service personnel. Do not attempt to service the projector yourself so that
you would not be exposed to high voltage or other potential hazards.
Warning, Notices and Safety Instructions
1