46
ALIGNMENT
Rear Projection
The default setting is Off.
Whenyou have set up the projector for rear projection, please set it to ON. For more
information on different modes of projection, refer to " Page 17 : Modes of installation ".
Ceiling Mode
The default setting is Off.
Whenyou have set up the projector for ceilingmode (hung from the ceiling in reverse), please
set it to ON.For more information on different modes of projection, refer to " Page 17 : Modes
of installation ".
Lens Control
•
Zoom
This function is identical to the one covered in previous sections. Refer to " Page 15 :
6.Adjusting focus and zoom. ".
•
Focus
This function is identical to the one covered in previous sections. Refer to " Page 15 :
6.Adjusting focus and zoom. ".
•
Shift
This function is identical to the one covered in previous sections. Refer to " Page 15 : 5.
Adjusting the projector's angle ".
Keystone
Use this function to correct keystoning caused by projection angle.
•
Horizontal Keystone
This function is identical to the one covered in previous sections. Refer to " Page 16 : 7.
Correcting keystoning caused by projection angle ".
•
Vertical Keystone
This function is identical to the one covered in previous sections. Refer to " Page 16 : 7.
Correcting keystoning caused by projection angle ".
Note : * The summation of the absolute value of horizontal keystone and vertical keystone is limited to
less than or equal to 350. *
6
OSD Menu description
