![background image](http://html.mh-extra.com/html/barco/rlm-w8/rlm-w8_user-manual_474342054.webp)
54
Start Up Chime
Set it to On to have the projector play a sound effect during start up; when it is set to off, the
projector will not play any sound effect to indicate start up.
Button 1~5
Use this function to designate the image source for each corresponding button.
For example, if you have assigned Button 1 as HDMI1 and Button 2 as RGB-S,
when you press
1
on the remote control, the projector will show the image from HDMI1.
when you press
1
on the remote control, the projector will switch to the image from
RGB-S.
You can choose from eight different input sources on the projector, namely: HDMI1, HDM2,
RGB D-15(RGB-HV/SOG), YUV1, YUV2(RGBHV/YUV2), Composite Video(Video), S-Video,
RGB-S, and SDI/HDSDI/3G.
Trigger1 ~2
The projector comes with two sets of Trigger output. You can configure two different devices
connected to the projector via the trigger ports to be automatically turned on when the
projector is on. There will be a 2-3 second delay prior to activation to prevent operation of this
function when the user is choosing the desired aspect ratio.
5:4
Outputs 12V of power on Trigger1 or 2 when the user chooses the 5:4 aspect ratio.
4:3
Outputs 12V of power on Trigger1 or 2 when the user chooses the 4:3 aspect ratio.
16:10 Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:10 aspect ratio.
16:9
Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:9 aspect ratio.
1.88
Outputs 12V of power on Trigger1 or 2 when the user chooses the 1.88 aspect ratio.
2.35
Outputs 12V of power on Trigger1 or 2 when the user chooses the 2.35 aspect ratio.
Letterbox
Outputs 12V of power on Trigger1 or 2 when the user chooses the Letterbox
aspect ratio.
Native
Outputs 12V of power on Trigger1 or 2 when the user chooses the native
aspect ratio.
Unscaled
Outputs 12V of power on Trigger1 or 2 when the user chooses the Unscaled
aspect ratio.
Auto
Outputs 12V of power on Trigger 1 or 2 when the projector is turned on.
Auto Source
Off
: default setting. By enabling this function, the projector will automatically determine
the source of input every time it is turned on so that the user will not have to make the
selection on the OSD Menu.
Setting the function off will require the user to specify source of image input on the OSD
Menu in order for the projector to display the intended image.
Language
You can use this function to select the language you wish for the OSD Menu to be displayed
in. You can choose from the following nine languages:
English, French, Spanish, German, Portuguese, Simplified Chinese, Traditional Chinese,
Japanese and Korean.
6
OSD Menu description