51
6
OSD Menu description
2. Color matching 2 projectors on white is done with P7 (R.G.B.C.M.Y.W) adjust in
projector toolset.
3. Brightness matching 2 projectors can be done with the lamp power(Refer to
adjustment by dimming the projector with higher lumens.
4. Use ScenergiX -> White level to set the blending size based on the overlap region
size.
Use ScenergiX -> Black level position to adjust the start position of black level
compensation.
Use ScenergiX -> Black level to raise the brightness of non-overlap zone such that
the brightness of the overlap zone and non-overlap zone are matched for black
level.
Note1 : Please note that the following allowable warp, blanking and ScenergiX combination based on the
underlying chip specification.
Note 2: ScenergiX / 4 corner combination is available when black level is not adjusted.
Note 3: Blend along corners is available when black level is not adjusted.
Black Level
Keystone Rotation Pin/Barrel 4-corner blanking Top/Bottom or
Left/Right only Blend along corners Black Level
Keystone
X
X
X
X
X
X
X
Rotation
X
X
X
X
X
X
X
Pin/Barrel
X
X
X
X
X
X
X
4-corner
X
X
X
OK
OK
OK
X
blanking
X
X
X
OK
OK
OK
OK
Top/Bottom or
Left/Right only
X
X
X
OK
OK
OK
Blend along corners
X
X
X
OK
OK
X
Black Level Black Level
X
X
X
X
OK
OK
X
ScenergiX
S
ce
ne
rg
iX
White Level
White Level
