Barco MES ACURAS HEAD, Руководство пользователя и инструкция по установке

Страница: 76 / 131

8. Getting started
1 2
a c
d
f
b
e
g
h
Image 8-66
Example: Multiple channels setup (With Blend Zone)
1 channel 1
2 channel 2
a, c, f, h corners of channel 1
b, d, e, g corners of channel 2
C
AUTION
:
Corners in Electrical Soft-Edge Matching zones only are allowed. Corners in Optical Blend zones
are not supported.
The shape of the visible channel area can be more general than the rectangular examples above.
While de fi ning the AutoGeometry positions, you can use both Position subtype With Blend Zone or Without
Blend Zone depending on corner types in that position. If the de fi ned position has both overlapping and non
overlapping corners, you must select Position subtype With Blend Zone.
How to de fi ne AutoGeometry positions for standard channels?
1. Project any image or internal pattern from the projector(s) for the desired AutoGeometry position.
2. On the Positioning Page, navigate to Position > Position type and select AutoGeometry from the drop down list.
68 R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010