Barco MES ACURAS HEAD, Руководство пользователя и инструкция по установке

Страница: 55 / 131

8. Getting started
3. Click the New button to de fi ne a new position or select an existing position from Position drop down list to change it. For a new
position, a name must be entered in the Position edit box.
You will be prompted to physically position the Auto Alignment Head at the correct location. See image 8-20.
Image 8-19
Creating a new position
Image 8-20
Note: Selecting an existing position will highlight the selected projector used in this position.
Note: Use the Delete button to delete an existing position, if required. All capture data belonging to this position will be deleted.
Note: If you have select an existing position and click the Test button, the selected existing position is shown as a square on
the image and the laser beam will point at it.
4. Select the correct Auto Alignment Head location from the Head Location drop down list.
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 47