Barco Matrix-PRO HD-SDI, Инструкция по установке и эксплуатации

Страница: 43 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
37
Example: SMODE 0 (Sets Serial mode for RS-232.)
SMODE 1 10 (Sets Serial mode for RS-485 with ID 10)
Command:
SWITCH mode
Description: Video switching mode. Selects either RGB delay, Vertical Sync,
Composite Sync, or V Ref Sync.
Parameters: mode - Mode; [0|1|2|3], RGB|Vsync|Comp|VREF
Query:
SWITCH?
Returns the current video switching mode in the format.
=mode
Example: SWITCH 0 (Sets video switching mode to RGB delay.)
Command:
TAKE en
Description: Route / Cancel all pending video/audio routes.
Parameters: en - Mode; [0|1], Route all pending|Cancel all pending. 0 is the
equivalent of pressing the
CANCEL button on the front panel. 1 is the equivalent of pressing the
TAKE button on the front panel.
Example: TAKE 1 (Routes all pending video/audio routes.)
Command:
UNOV
Description: Saves the system parameters to non-volatile RAM. The system
parameters
stored are the current output/input routes, grouping information, IP
setting and serial port configuration parameters. Upon power up, the
system parameters stored in non-volatile RAM are used for system
configuration.
Parameters: None
Example: UNOV
(System parameters are saved to non-volatile RAM.)
Command:
VDLY dly
Description: Updates the vertical interval delay parameter for vertical interval
switching.
Parameters: dly - The number of V Syncs before video is switching occurs; [1-
255]
Query:
VDLY?
Returns the current vertical interval delay setting in the format:
=dly
Example: VDLY 10 (Set vertical interval delay to 10.)