Barco Matrix-PRO HD-SDI, Инструкция по установке и эксплуатации

Страница: 37 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
31
and device 31 will process the WX command with parameters of 200 and 98. The cde
'!' follows directly after the last command to end the command string.
Commands received in the command string will not be processed until the cde
character '!' is received. This format allows commands to be stack to the same or
multiple devices and executed when the cde '!' character is received by all units.
Any incomplete or unknown commands will be ignored. The maximum number of
commands that can be stacked per unit is 16. Each unit will only stack those
commands assigned to it, even though all units receive the same command string.
During queue processing, no input buffer processing is performed. Characters sent
through the serial port during queue processing are still stored in the input buffer. If
hardware flow control is not observed, it is important to guarantee that the input
buffer limit is not exceeded before completion of the last command string. Note: The
command queue does not support backspace characters.
To minimize bus traffic the command words will be kept as short as possible. The
units will not respond with prompts or any command error conditions. Echo will be
disabled when RS-485 mode is selected.