Barco Matrix-PRO HD-SDI, Инструкция по установке и эксплуатации

Страница: 18 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
12
3.0 OPERATION
This portion of the manual provides instructions that indicate how to control all
MatrixPRO
TM
functions. There are many means to control the unit available to the
user. First, the front panel is available for status and control. Two keys and display
on the MatrixPRO
TM
front panel are used for signal routing, to save and recall looks,
mute audio sources, for volume control, and for other system configuration.
A second means of control is through the use of the MP Control software. The GUI
can interface to the MatrixPRO
TM
through RS-232 or Ethernet.
Barco Folsom also makes a Remote Control Switch Panel for controlling the
MatrixPRO
TM
remotely via RS-485. And finally the unit can be controlled remotely by
various third-party controllers.
This section also describes field servicing the MatrixPRO
TM
16x.
3.1 POWER-UP INITIALIZATION FOR MATRIXPRO
After plugging in the MatrixPRO
TM
to the wall socket (two are provided for dual power
supply models), locate the Power Switch(s) on the back of the frame and turn the
power ON. The LED's on the buttons will light, the display will show the Main Menu
screen, and the last saved or recalled setup will be recalled.