Barco Matrix-PRO HD-SDI, Инструкция по установке и эксплуатации

Страница: 32 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
26
5.10 UPLOADING FILES TO THE MATRIXPRO UNIT
1) Once communications have been established and verified, click on the "Open
script file to read and upload" button.
2) Select "Complete Load.sld" and click OPEN.
3) After several minutes, the loader utility will display several messages. Press
OK for each message that appears. After several minutes, the loader utility
will inform the user that the process is complete.
4) Once this is done, you must power down the MatrixPRO
TM
unit and turn it
back on for the software to take effect. You can also close the loader utility at
this time.
5)
Verify the new software is in the system by looking for the version numbers in
the MP Commander GUI.
6) Once you have verified the version number, it is recommended that a factory
reset be performed. This is done by going MP Commander GUI and clicking on
the Factory Reset button