Warranty Statement
User manual CCFD 2320
83
disruption of communication lines or due to force
majeure, or any reason foreign to the equipment.
2.6 Any specific services or procedures, asked for by
Customer, related to verification of repaired equipment.
ARTICLE 3: OBLIGATIONS OF THE CUSTOMER
Customer hereby assumes the following obligations as
partial consideration for BarcoView performance of its
requirements under the warranty condition; failure by
Customer to meet its obligations under this paragraph
shall excuse BarcoView's performance hereunder:
3.1 Customer shall not expose BarcoView personnel to
any unsafe working conditions.
3.2 Repairs to equipment under warranty resulting from
improper maintenance or repair performed by the
Customer, or its officers, agents, employees, or
representatives, shall be borne by the Customer at its
additional cost and expense.
3.3 The customer is responsible for installing the
BarcoView equipment in an environment for which it was
intended. If there is an indication that the equipment
was used - even temporary - outside its specifications,
BarcoView is entitled not to perform warranty repairs
and terminate the warranty agreement. Any actions that
have been taken by BarcoView in this respect, may be
invoiced to the Customer at normal pricing.
ARTICLE 4: MODIFICATIONS OR CHANGES TO THE
EQUIPMENT
Customer may make additions to the equipment only
with explicit written consent of BarcoView.
Any attempt to do so, voids the warranty.
