Installation
20
User manual CCFD 2320
Notice:
If, after installing the display or the system, you change
the panel orientation while an image is on the screen,
the result depends on your application:
•
In a Color Coronis system, the image orientation will
adapt to the new panel orientation automatically
after a second.
•
If the I-switch software is installed and enabled, the
image resolution will also be adapted automatically
to the new panel orientation.
•
If you use the display stand-alone, the image
orientation will not change with the panel orientation.
Only the orientation of the on-screen display (OSD)
will change automatically in case “Orientation” in the
OSD Geometry menu is set to “Automatic”.
To change the orientation of the image, you will have
to change the resolution in the Windows Display
control panel (if possible).
Power connection
To connect the power:
1. To get access to the connectors, remove the
connector compartment cover by pulling down the 2
clips at the top of the cover.
2. Connect the output of the 12V DC power supply to
the DC input of the display.
