Barco Athena Скачать руководство пользователя страница 66

Страница: 66 / 184

R5906790 /04

Athena

Type of HDD swap

On ICMP

On ICMP-X

Set of 3 HDDs with content
reused from an ICMP with
GEN1 storage controller.

On an ICMP with GEN1 storage
controller:

•

Content is preserved but
certificates (KDM) need to be re-
ingested.

On an ICMP with GEN2 storage
controller:

•

All content will be lost.

•

Only usable after RAID
initiali restart (content
can then be ingested
immediately).

•

All content will be lost.

•

Only usable after RAID
initiali restart (content
can then be ingested
immediately).

Set of 3 HDDs with content
reused from an ICMP-X.

•

Unit is equipped with an GEN1

storage controller (default
configuration):

•

All content will be lost.

•

RAID initialization needs to be
perform with Communicator.

•

Unit has been upgraded with a

GEN2 storage controller (+ ICMP
software 1.4.2 or higher is
installed):

•

Content is preserved but
certificates (KDM) need to be
re-ingested.

•

Content is preserved but
certificates (KDM) need to be re-
ingested.

8.4 Installing a HDD into the ICMP(-X)

This procedure assumes that the HDD slot of the ICMP(-X) is empty. If not, see procedure

“

Removing a HDD from the ICMP(-X)

”

, page 68.

CAUTION:

Always use a new empty spare part HDD approved by Barco to replace a malfunction

HDD. Do not use a HDD from another ICMP(-X) HDD set.

CAUTION:

Always make sure that all HDDs in the ICMP(-X) HDD set have the same storage

capacity. See label on top of the HDD to know the storage capacity.

Re-initialization or rebuild of RAID

Installing or exchange one or several HDDs into ICMP (-X) has an impact on data presents on the already
inserted drives. RAID integrity depends on the type of HDD swap. Refer to the chapter

“

What are the possible

HDD swaps

”

, page 65.

How to install a HDD ?

Ensure that the projector is switched off.

Prepare the HDD for insertion by moving the latch towards the left and push the unlock button to open the
handle.

ICMP(-X)

Содержание Athena

























































































































































































Результаты поиска

Содержание Athena

Отзывы:

Похожие инструкции для Athena

Бренды по названию

Популярные бренды

Barco Athena, Руководство по установке

Результаты поиска

Содержание Athena

Отзывы:

Похожие инструкции для Athena

Бренды по названию

Популярные бренды