Barco Athena, Руководство по установке

Страница: 43 / 184

R5906790 /04 Athena 43
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
It's recommended to place the plastic cover of the original projector packaging, back into the Lens
opening to prevent intrusion of dust.
6.6 Lens shift, zoom & focus
Motorized lens adjustment
The Athena is equipped with a motorized lens shift and zoom & focus functionality.
Maximum shift range
The lens can be shifted with respect to the internal optics of the projector (DMD) which results in a shifted
image on the screen (Off-Axis). A 100% shift means that the centre point of the projected image is shifted by
half the screen size. In other words, the centre point of the projected image falls together with the outline of the
image in an On-Axis projection. Due to mechanical and optical limitations the shift range is limited as well.
All lenses have a shift range of 50% up, 50% down, 30% left, and 30% right. This range is valid for all throw
ratios. Within these shift ranges the projector and lens perform excellently. Configuring the projector outside
these shift ranges will result in a slight decline of image quality.
U
D
SIDE VIEW
P
F
TOP VIEW
P
F
L
R
+50%
-50%
-30%
+30%
U
D
L R
P
F
+50%
-50%
-30% +30%
Image 6-12
P DMD.
F Field of view.
It ’ s mechanical possible to shift outside the recommended field of view (±90% UP/DOWN and ±50%
LEFT/RIGHT), but this will result in a decline of image quality depending on the used lens and the
zoom position of the used lens. Furthermore, shifting too much in both directions will result in a
blurred image corner.
How to shift the lens of the Athena ?
1. Use the up and down arrow buttons on the Local Keypad to shift the lens vertically and use the left and
right arrow buttons on the Local Keypad to shift the lens horizontally .
SHIFT
Image 6-13
Lenses & Lens selection