Barco Athena Скачать руководство пользователя страница 69

Страница: 69 / 184

R5906790 /04

Athena

8.6 HDD status LEDs

HDD status LEDs

Image 8-15

HDD I/O LED

RAID LED

Status LEDs on ICMP(-X)

HDD I/O

RAID

HDD Status

Off

HDD idle / disk in RAID OK.

Blinking green

Off

HDD I/O activity / disk in RAID OK.

Blinking green

Slow blinking

red

HDD disks not (yet) initialized (not supported on ICMP with GEN1 storage
controller).

Blinking green

Fast blinking

red

HDD I/O activity / RAID rebuilding.

Off

Red

HDD idle / Disk error. Consult the following troubleshooting table for
curative actions.

When entering a new HDD in an ICMP(-X), the HDD RAID LED will be full red for a short time. This
is not an error, the HDD has not yet been

“

recognized

”

by the projector and ICMP(-X).

Once the HDD has been accepted by the ICMP(-X), the full red LED will start blinking in accordance
with the previous status table.

If the LED remains full red, an error has occurred. In this case, consult the following troubleshooting
table for curative actions.

Troubleshooting

Situation

Solution

One disk failed (red LED) +

RAID degraded

The ongoing event is not interrupted.

Note:

The disk status (RAID degraded) can be

retrieved via the (Web) Commander. See user guide
of the (Web) Commander.

Switch off the power.

Replace the defect HDD with approved model of
the same storage capacity. See procedure

“

Removing a HDD from the ICMP(-X)

”

, page 68,

and

“

Installing a HDD into the ICMP(-X)

”

, page

66. Ensure to insert the HDD firmly.

Switch on the power.

Result:

As soon the new HDD is detected by the

ICMP(-X) the rebuild of the RAID is started (Blinking
red LED).

One disk failed (red LED) + Error 10580

“

local

storage not available

”

Note:

The disk status (Error code) can be retrieved

via the (Web) Commander. See user guide of the
(Web) Commander.

Switch off the power.

Replace the defect HDD with approved model of
the same storage capacity. See procedure

“

Removing a HDD from the ICMP(-X)

”

, page 68,

and

“

Installing a HDD into the ICMP(-X)

”

, page

66. Ensure to insert the HDD firmly.

ICMP(-X)

Содержание Athena

























































































































































































Результаты поиска

Содержание Athena

Отзывы:

Похожие инструкции для Athena

Бренды по названию

Популярные бренды

Barco Athena, Руководство по установке

Результаты поиска

Содержание Athena

Отзывы:

Похожие инструкции для Athena

Бренды по названию

Популярные бренды