background image

A

Article 4: Warranty area
1. The warranty is only valid in those countries where Barbas appliances are sold

through an official dealer network.

Article 5: Warranty period
1. This warranty will only be granted during the warranty period.
2. The body of the Barbas appliance is guaranteed for a period of 10 years against

construction and/or material faults, starting from the moment of purchase.

3. For other parts of the Barbas appliance, a similar warranty applies from the moment

of purchase for a period of one year.

4. For user parts such as glass, glass (cord) and the interior of the combustion

chamber, a similar guarantee is given until after the first burning.

Article 6: Liability
1. A claim granted by Barbas Bellfires B.V. under this warranty does not automatically

imply that Barbas Bellfires B.V. also accepts liability for any possible damage. The

liability of Barbas Bellfires B.V. never extends further than that stated in these

warranty conditions. Any liability of Barbas Bellfires B.V. for consequential damage is

expressly excluded.

2. That stated in this provision is not valid if and to the extent that is derives from a

mandatory provision.

3. All agreements entered into by Barbas Bellfires B.V. are, unless specifically stated

otherwise in writing and to the extent that they are permitted based on applicable

law, subject to the FME-CWM general sales and delivery conditions for the

technology industry.

Barbas Bellfires B.V.
Hallenstraat 17 5531 AB Bladel
The Netherlands
Tel: +31-497339200
Email: [email protected]

Carefully retain the user manual; it shows the serial number of the appliance. You will

need this if you wish to claim under the warranty.

Warranty Terms

Evolux 100-45

47

Содержание Evolux 100-45

















































Отзывы: