barbas Evolux 100-45, Руководство по установке и обслуживанию

Страница: 29 / 48

4. Rotate the door forward.
5. The inside of the door and the
glass is now accessible for
inspection and cleaning.
6. To close the door and frame do
steps 2 to 4 in reverse order.
Make sure the door lock is is
locked.
66.3 Combustion air supply
1. Make sure that the inlet of the pipe of the external combustion air supply is not
blocked by leaves or other debris.
2. Clean the inlet of the pipe of the external combustion air supply.
6.4 Convection air system
Note:
Do the procedure in this section only when a convection air system has been
installed.
1. Clean the 2 inlet openings for the convection air.
2. Clean the 2 outlet openings for the convection air.
6.5 Chimney
Note:
It is recommended to contact a registered chimney sweep company to inspect
and clean the chimney.
1. Sweep and inspect the chimney
2. Make sure there is no blockage in the chimney, for example by birds' nests.
3. Make sure the chimney is in good condition. Examine for cracks, loose parts and flue
gas leakage. It is recommended to use an inspection camera.
Make sure to remove the heat shield and the upper and lower baffle before the chimney
sweep work. Refer to
6.6
.
Make sure to replace the heat shield and the upper and lower baffle after the finish of the
chimney sweep work and before firing the appliance. Refer to
6.7
.
Maintenance
Evolux 100-45 29