Banner Q5X Скачать руководство пользователя

Страница: 3 / 44

1 Product Description

Class 2 laser CMOS sensor with dual outputs and IO-Link. Patent pending.

• Laser triangulation sensor with a range from 95 mm to 2000 mm (9.5 cm to 200 cm)
• Bright output indicators and real-time distance feedback provide easy set up and

troubleshooting for reduced installation costs

• Exceptionally high excess gain enables the sensor to reliably detect the darkest

objects (< 6% reflective black targets), including black targets against a black

background, black targets against a shiny metal background, clear and reflective

objects, multicolor packaging, and targets of all colors

• Dual independent output channels and communication over IO-Link
• Optional Remote Sensor Display (RSD) (available separately) enables remote

programming and monitoring

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury

or death. This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A sensor failure or malfunction can cause either an energized or de-

energized sensor output condition.

1.1 Models

Model

Sensing Range

Channel 1 Default

Channel 2 Default

Connection

Q5XKLAF2000-Q8

95 mm to 2000 mm (9.5
cm to 200 cm)

IO-Link, Push/pull output

User selectable to be fixed

NPN or PNP

PNP output or user selectable
multi-function

User selectable to be fixed

NPN or PNP

270° rotatable Integral 4-pin
M12/Euro-style quick
disconnect

1.2 Overview

The Q5X Laser Triangulation Sensor with Background Suppression is a Class 2 laser CMOS sensor with an IO-Link and

multifunction input and output.
The normal sensor state is Run mode. From Run mode, users may change the switch point value and channel selection and

perform the selected TEACH method.
The secondary sensor state is Setup mode. From Setup mode, users may select the TEACH mode, adjust all standard

operating parameters, and perform a factory reset.

1.3 Laser Description and Safety Information

CAUTION: Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure. Do not attempt to disassemble this sensor for repair.

A defective unit must be returned to the manufacturer.

1.3 Class 2 Laser Models

CAUTION: Never stare directly into the sensor lens. Laser light can damage your eyes. Avoid placing any

mirror-like object in the beam. Never use a mirror as a retroreflective target.

Q5X Laser Triangulation Sensor with Background Suppression

www.bannerengineering.com - Tel: +1.763.544.3164

Содержание Q5X













































Результаты поиска

Содержание Q5X

Отзывы:

Похожие инструкции для Q5X

Бренды по названию

Популярные бренды

Banner Q5X, Инструкция по эксплуатации

Результаты поиска

Содержание Q5X

Отзывы:

Похожие инструкции для Q5X

Бренды по названию

Популярные бренды