Banner DXM1200-X2, Инструкция по эксплуатации

Страница: 80 / 83

February 02, 2024
DXM1200-X2 Controller Instruction Manual
© Banner Engineering Corp. All rights reserved.
80
Continued from page 79
Radio Module DX80-2400 Radio Module SX243
IC: 7044A-DX8024 IC: 7044A-SX243
HVIN: DX80G2 / DX80N2 HVIN: SX243
FCC Notices
IMPORTANT: The transmitter modules DX80-2400 and SX243 have been certified by the FCC / ISED for use with other
products without any further certification (as per FCC section 2.1091). Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
IMPORTANT: The transmitter modules DX80-2400 and SX243 have been certified for fixed base station and mobile
applications. If modules will be used for portable applications, the device must undergo SAR testing.
IMPORTANT: If integrated into another product, the FCC ID/IC label must be visible through a window on the final device or it
must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the outside
of the final device that contains the following text:
Transmitter Module [DX80-2400 or SX243]
Contains FCC ID: [UE300DX80-2400 or UE3SX243]
Contains IC: [7044A-DX8024 or 7044A-SX243]
HVIN: [DX80G2, DX80N2 or SX243]
This device complies with Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and
2) This device must accept any interference received, including interference that may cause undesired operation.
Antenna Warning: This device has been tested with Reverse Polarity SMA connectors with the antennas listed in "Certified
Antennas for 2.4 GHz" on page 80 . When integrated into OEM products, fixed antennas require installation preventing end-
users from replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC
Section 15.203 (unique antenna connectors), FCC Section 15.247 (emissions), and ISED RSS-Gen Section 6.8.
FCC and ISED Approved Antennas
WARNING: Antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons.
AVERTISSEMENT : Les antennes utilisées pour cet émetteur doivent être installées de manière à assurer une distance de
séparation d'au moins 20 cm de toutes les personnes.
NOTICE: This equipment is approved only for mobile and base station transmitting devices. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product procedures.
The radio transmitter modules DX80-2400 and SX243 have been approved by FCC and ISED Canada to operate with the
antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a
gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Certified Antennas for 2.4 GHz
Model Antenna Type 2.4 GHz Radio Module Maximum Gain Impedance
Integral antenna DX80-2400 or SX243 Unity gain
BWA-2O2-C Omni, 1/2 wave dipole, Swivel DX80-2400 or SX243 ≤ 2 dBi 50 Ω
BWA-2O2-D Omni, Dome, Box Mount DX80-2400 or SX243 ≤ 2 dBi 50 Ω
Continued on page 81