Banner DXM1200-X2, Инструкция по эксплуатации

Страница: 60 / 83

February 02, 2024
DXM1200-X2 Controller Instruction Manual
© Banner Engineering Corp. All rights reserved.
60
Continued from page 59
EIP Assembly Instance 100 (16-bit) DXM Local Registers
4 9900 15 9900
Define the Network Interface Settings
On the Cloud Services screen (shown with Show advanced settings selected), define the network connection settings by
selecting Ethernet or Cell from the Network Interface drop-down list. This determines how the DXM Controller sends data.
If you don't require pushing data to a web server, set the Cloud Push interval to zero.
Cloud Services screen
Configure your Ethernet Connection
When selecting Ethernet, go to the Settings › Ethernet screen.
Settings > Ethernet screen
To define the Ethernet IP address, give the DXM Controller a static IP address. In most cases, you may select the
device to use DHCP and have the IP address automatically assigned. 1.
DNS settings are not typically required. The DXM Controller uses a public service to resolve Domain names, but if the
network connection does not have Internet access, the DNS settings may be required. 2.