Banner DXM1200-X2, Инструкция по эксплуатации

Страница: 23 / 83

February 02, 2024
DXM1200-X2 Controller Instruction Manual
© Banner Engineering Corp. All rights reserved.
23
•
•
•
DIP switch bank 1 and bank 2
DIP Switch
Bank 1
Button
LED
DIP Switch
Bank 2
1 1
ON ON
Antenna
2
3
4
2
3
4
Modbus Registers for the MultiHop Radio Board Module
The DX80 MultiHop client radio is a tree-based architecture device that allows for repeater radios to extend the wireless
network. Each device in a MultiHop network is a Modbus device with a unique Modbus ID.
Modbus registers in a MultiHop network are contained within each individual radio device. To obtain Modbus register data
from a MultiHop device, configure the DXM Controller to access each device across the wireless network as an individual
Modbus server device.
Example MultiHop Modbus registers with generic devices.
MulitHop Device Modbus ID Modbus Registers
DXM client radio 1 none
Server radio 11 Modbus register 1–16 are inputs, 501–516 are outputs
Repeater radio 12 Modbus register 1–16 are inputs, 501–516 are outputs
Server radio 15 Modbus register 1–16 are inputs, 501–516 are outputs
DIP Switch Settings for the Performance Gateway Radio
Module
The 900 MHz radios have a high output option that will transmit at 1 Watt (30
dBm) or 500 mW (27 dBm). There is a low output option for each that will
transmit at 250 mW (24 dBm). The 250 mW mode reduces the radio's range
but improves the battery life in short-range applications. For 2.4 GHz models,
this DIP switch is disabled. The transmit power for 2.4 GHz is fixed at about
65 mW EIRP (18 dBm).
DX80 Performance Gateway ISM radio devices are defined with R1, R3, and
R8 in the model number.
DXMxxx-xxR1 - DX80 Performance 900MHz
DXMxxx-xxR3 - DX80 Performance 2.4GHz
DXMxxx-xxR8 - DX80 Performance 900MHz (Australia)
IMPORTANT: To adjust the transmit power on the Gateway
radio, Banner recommends using the LCD menu (System
Conf
› ISM Radio › RF CNTRL).
DIP switch settings for bank 1
DIP Switch 1
OFF 1 Watt (30 dBm) or 500 mW (27 dBM) (default configuration; 900 MHz only)
ON 250 mW (24 dBm, 900 MHz models only), DX80 compatibility mode
Modbus Registers for the Performance Gateway Radio
Module
The DX80 Performance Gateway is a star-based architecture device that contains all the Modbus registers for the wireless
network within the Gateway. To access any input or output values within the entire wireless network, read the appropriate
Modbus register from Gateway.