Channel 2 Discrete Menu
Program (PRG) mode allows the following
settings to be programmed in the DF-G3.
When CH2 is selected in Program mode, the
settings below can be configured for CH2
discrete output and are independent from
CH1 settings.
CH2 Discrete Factory Default Settings:
Out SEL2
LO
tch SEL2
2-pt tch
OFSt Pct2
10 pct
Auto thr2
oFF
dLY SEL2
oFF
SEnS SEL2
Std
(+)
or
(-)
to set value
(+)
or
(-)
to set value
To scroll through menu lists: Press “+” or “-”
To enter a choice list or to select and save: Click SET
To exit a choice list without saving:
Press
and
hold SET for
2 seconds
Click SET
to enter choice list
Press and hold SET to
exit
choice list without saving
D
ISPLA
Y
LOOP
Return to Menu List
PROGRAM MODE
Switch Mode
to “PRG”
Click SET
to enter choice list
Click SET
to enter choice list
DISPLA
Y
LOOP
Click
SET
to
enter choice
list
Click
SET
rocker
button
Click SET
to select
and save a choice in any list
Menu List
on display
represents a “w”
on display
represents a “m”
Click
SET
to
enter choice
list
default setting
setting-specific
Click SET
to enter choice list
DISPLA
Y
LOOP
(+)
or
(-)
to set value
Click SET
(+)
or
(-)
to set value
Click SET
(+)
or
(-)
to set value
Click SET
(+)
or
(-)
to set value
Click SET
(+)
or
(-)
to set value
Click SET
DISPLA
Y
LOOP
DISPLA
Y
LOOP
DISPLA
Y
LOOP
Available
in
Lt, dr or wind
set only
Not available
in CAL Set
Adjust Mode
Sliding the RUN/PRG/ADJ mode switch to the ADJ position allows the user to perform Expert TEACH/SET methods and
Manual Adjustment of the threshold and the midpoint or endpoints of the analog output depending on whether a 1-point
SET or 2-point TEACH was used.
NOTE: For threshold and analog endpoints, when teaching CH2, the gain setting will be the same as
the gain setting made during the CH1 teach. Reteaching CH1 may invalidate the previous CH2 teach.
TEACH Procedures
The instruction manual has detailed instructions for these TEACH modes:
CH1 Analog
CH2 Discrete
•
Two-Point TEACH
•
One-Point SET
•
Two-Point TEACH
•
Dynamic TEACH
•
Window SET
•
Light SET
•
Dark SET
•
Calibration SET
DF-G3 Long Range Expert
™
Dual Display Fiber Amplifier with Analog Output
P/N 190340 Rev. B
www.bannerengineering.com - Tel: +1-763-544-3164
7