Quick Start Guide
Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies; analog current or voltage
output models with an independent NPN or PNP discrete output are available.
This guide is designed to help you set up and install the DF-G3 Long Range Expert Dual Display Fiber Amplifier with Analog
Output. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please
refer to the Instruction Manual at
http://www.bannerengineering.com
. Search for p/n 190341 to view the Instruction
Manual. Use of this document assumes familiarity with pertinent industry standards and practices.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Overview
Figure 1. DF-G3 Dual Output Analog with Discrete Output
1
Analog and Discrete Output LEDs
2
CH1/CH2 Switch
3
RUN/PRG/ADJ Mode Switch
4
Lever Action Fiber Clamp
5
Red Signal Level
6
Green CH1 Analog Output Signal or CH2
Threshold
7
+/SET/- Rocker Button
DF-G3 Long Range Expert
™
Dual Display
Fiber Amplifier with Analog Output
Original Document
190340 Rev. B
3 March 2016
190340