manualshive.com logo in svg

Bang & Olufsen ML Gateway, Руководство по установке

Поделиться
Скачать
Bang & Olufsen ML Gateway Скачать руководство пользователя страница 43

Supported devices     43

Lutron HomeWorks QS / Radio Ra2

This driver is used to communicate with both Lutron Homewoks QS and Lutron Radio RA2 systems.

Connection to a Radio RA2 system

Communications with Radio RA2 is done via the Radio RA2 Main Repeater, which allows interaction with the system via 100 programmable virtual 
buttons (‘phantom buttons’). This device provides both RS232 and Ethernet interfaces.

Connection to the RS232 interface can be done directly using a 3-wire RS232 cable and it is fixed at:

-  Bits per second 

9600

-  Data bits 

 

8

- Parity 

 

none

-  Stop bits 

 

1

-  Flow control   

none

Connection to a Homeworks QS system

Communication with the Homeworks QS system is done via the Ethernet interface on the Homeworks QS Processor. Connection settings for 

Ethernet consist of:

-  IP address of the Main Repeater: 

192.168.1.50 (default)

- 

Login: 

   lutron 

(default)

- 

Password 

   integration 

(default) 

-  Telnet IP port  

 

 

23 (default)

Defining resources

On the device setup screen, you should identify all the components with which you need to interact. These include:

-  Master Control units 
- Keypads 
- Interfaces

!  Note that resources are the entire components and not the individual buttons within them. Each Radio RA2 resource has a name and an ID. The ID 

field corresponds to the identification number in the Radio RA2 system and ranges from 1 to 100. Use the monitoring facilities or the Radio RA2 

telnet terminal in order to obtain the component IDs.

Homeworks QS / Radio RA2 events and commands

An event corresponds to a button press, release, hold, or multi-tap on one of the device buttons. Supported commands are button presses, button 
holds and button releases.

Содержание ML Gateway



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды