Supported devices
On the following pages, devices and resources for all supported systems are described. Click on the preferred system to be linked direcly to it.
Clipsal
The Clipsal programming model defines trigger groups and trigger actions as a way to call lighting scenes. Any scene defined by a trigger group/
action pair can be called from ML Gateway.
Clipsal resources
Resources correspond to trigger groups. Usually a trigger group is shared by a set of mutually exclusive scenes, each identified by a trigger action
within the group.
Events and commands
Whenever a trigger group is set to a new action value, an event is generated on ML Gateway. Similarly, commands on ML Gateway are setting an
action value to a resource (trigger group).
Conson XP
Connection to a Conson system is made via an XP130 gateway module. This module provides an RS485 interface, so a RS232 to RS485 converter
is needed for connecting to ML Gateway.
Conson resources
On the resource screen, define the modules you need to interact with. A module is identified by a module type and a link number. Use the
monitoring tool to analyse the events on the bus.
Events and commands
Events occurring on the Conson bus are changes on a module’s input. This is signalled as a circuit make or break event. Similarly, ML Gateway
can send circuit make, break, or pulse (make followed by break) to any input of a module.
Supported devices 34
-
Clipsal
-
Conson XP
-
Custom strings (up to 4 drivers)
-
Dynalite
-
IP Camera
-
KNX / EIB
-
Lauritz Knudsen, IHC, Schneider, LexControl
-
Legrand / BTicino
-
Lutron Grafik Eye
-
Lutron Grafik QS
-
Lutron HomeWorks
-
Lutron HomeWorks QS / Radio Ra2
-
Lutron Radio RA
-
Scheduler
-
SmartHouse
-
Vantage