Any equipment you connect to the connection panel must be registered in the
SOURCE LIST SETUP menu.
Connection panel – BeoPlay V1–40
USB
(
, 5V – 0.5A)
For connection of a USB
device to browse digital
photos, video or music
files
Ethernet ( )*
1
For connection to the Internet. For
software updates or for UPnP
streaming of digital photos, video or
music files from, for example, a NAS
device
SATELLITE (14/18V – 0.4A)
Aerial input socket for a digital
satellite signal. Depending on your
tuner options, you may have either
one or no satellite socket. Never
connect an optional active antenna
here
AERIAL (5V – 50mA)
Aerial input socket for an external aerial/
cable TV network or for an analogue
signal
2 x COMMON INTERFACE
(CA Module)
For insertion of a CA module and smart card for
access to coded digital channels. For more information
about compatible smart card and CA module
combinations, contact your retailer. See the online
guide for information on correct insertion*
2
Important
Mains cord and plug
Connect the
~
socket on the connection panel of your TV to the wall outlet.
The TV is in standby mode and ready to be used.
The supplied plug and mains cord are specially designed for the product. Do
not change the plug and if the mains cord is damaged, you must buy a new
one from your Bang & Olufsen retailer.
1
*Make sure the cable connection between the
product and the router does not exit the building
to avoid contact with high voltage.
AERIAL
COMMON INTERFACE
SATELLITE
CHIPSIDE
CHIPSIDE
5V 50mA
10
