14
S
B
I M P LY
E T T E R !
B K
&
BKcSuite Setup
Setup Using a PC and BKcSuite
B&K Tool Suite may be installed using the CD-ROM included with the HD6 Transcoding Video Switcher. The
software is also available online at
. Your PC should be equipped with a CD-ROM or DVD
drive. B&K Tool Suite includes software for setting up B & K Receivers, Preamplifiers, SR10.1 remote, and
CK1.2 / CK1.1 Keypads and Video Switchers.
The installation path for BKcSuite is [c:/program files/B&K Components Ltd/BkcSuite.exe].
***Warning - PC requirements - 128MB RAM, Pentium grade or better processor, Windows 98SE operating
system or greater. (Exception- BKcSuite may not be compatible on some Windows NT machines) ***
Note: This section applies only if it is desired to operate the HD6 in a stand-alone configuration.
Do not perform this setup if the HD6 is to be connected to a CT Series Receiver.
Instead, set up the CT Receiver as desired - refer to the CT Receiver manual. The CT setup may be set either
stand-alone or connected through the HD6.
