8
S
B
I M P LY
E T T E R !
B K
&
S-Video Source Inputs
S-Video Connection
For use with S-Video, the S-Video (Y-C) signal must first be split into separate RCAs, one for Y and one for C.
Y video must connect to the Green RCA input connector and C video must connect to the Blue RCA input
connector. An adapter similar to the one pictured above is typically used. The HD6 will automatically select
S-Video when it is detected on any common source input IN 1 through IN 9 or dedicated zone input IN A through
IN F. S-Video is converted (transcoded) to component for simultaneous distribution out both the RCA and CAT5
zone outputs.
Video resolution will remain unchanged when transcoding from S-Video to component.
Composite Video Connection
For use with composite video, the composite video signal must be connected to the Red RCA input connector.
The HD6 will automatically select composite video when it is detected on any common source input IN 1 through
IN 9 or dedicated zone input IN A through IN F. Composite video is converted (transcoded) to component for
simultaneous distribution out both the RCA and CAT5 zone outputs.
Video resolution will remain unchanged when transcoding from composite video to component.
HARDWARE CONNECTIONS
Convert S-Video to RCA
HD6 S-Video Connection
Blue =
C
Green = Y
HD6 Composite Video Connection
Red = Composite Video (CVBS)
Common Source Inputs
Composite video connection
Common Source Inputs
