B&K 2250 Light, Руководство пользователя

Страница: 83 / 208

CHAPTER 8
Advanced Use of 2250 Light – Tips and Tricks
73
8.4 Notifications
The analyzer can send you a daily status or notify you if disk space is getting low or external
power has disappeared, etc. This is done via SMS or e-mail, as described in this section. The
SMS/e-mail notification contains a short status report for the analyzer. This facility is
especially useful if the analyzer is left for unattended monitoring.
8.4.1 Alarm Settings
If one or more of the following alarms occur, then a notification will be issued as either an SMS
or an e-mail, depending on your equipment and settings. If the notification fails (e.g. the
connection has been lost), then the analyzer will retry to send the notification once more after 5
minutes.
Table 8.1
Alarm Settings
Alarm Type Condition Comment
Power On When analyzer is
switched on or reboots Indicates start from a timer, or a power failure, or
unexpected behaviour
Measurement
State When a measurement
starts or stops Indicates measurement finished – or unexpected
behaviour
CIC When Charge Injection
Calibration fails Indicates possible measurement problem
Internal Battery When Internal Battery is
entering a specified
state: High, Low or
Critical. Indicates internal battery getting low. Internal Battery
will be in one of the states: Full, High, Low, Critical,
Charging or Unknown. You can set alarm to
High,
Low or Critical in Preferences, Notification Settings,
Alarm Settings, Internal Battery.
Note:
The internal battery will typically be in one of
the states Full or Charging if externally powered.
Entering one of the set states might then indicate a
power failure
Disk Space When remaining disk
space drops to or below
a specified percentage of
the total disk space Indicates disk space getting low
–
needs to be
swapped with an empty disk. Set the percentage in
Preferences , Notification Settings , Alarm Settings ,
Disk Space