B&K 2250 Light, Руководство пользователя

Страница: 81 / 208

CHAPTER 8
Advanced Use of 2250 Light – Tips and Tricks
71
Hardware version 4 accepts the following SD WLAN card:
• P322 802.11abg SD WLAN from Socket Mobile (www.socketmobile.com) –
Brüel & Kjær order number UL-1025
Hardware versions 1 – 3 accept the following CF LAN and WLAN cards:
• 10/100 Ethernet Ruggedized CF Card from Socket Mobile (www.socketmobile.com) –
Brüel & Kjær order number UL-1016
• Go Wi-Fi!
®
P500 CF WLAN, rev. B and rev. C from Socket Mobile – Brüel & Kjær order
number UL-1019
8.3.2 Parameters in Network Settings
Location
Use the Location parameter to specify a text up to 20 character long identifying the
analyzer or location of the analyzer. The Location will be displayed on the PC as well
as the serial number of the analyzer when browsing for analyzers in BZ-5503 and when
connected using the on-line display.
Note: The location parameter is useful for both
USB and LAN connections.
Network Connection
• Hardware versions 1 – 3:
– None : (default)
– CF Socket : Select this to use an Ethernet CF Card inserted in the Compact Flash
socket
– LAN Socket : (default) Select this to connect via a LAN cable. This is disabled if an
Ethernet CF card is inserted in the Compact Flash socket
• Hardware version 4 (G4):
For all analyzer types, the default is LAN Socket .
Set IP Address
Automatically: This will obtain an IP address from a DHCP server – if no server
available, then a Link-local address will be set
Manually: You have to set the IP Address , Subnet Mask , Default Gateway , Preferred
DNS and Alternate DNS (see below)
IP Address
The IP address of the instrument
Selectable if Set IP Address = Manually
Subnet Mask
The Subnet Mask combined with the IP address identifies the network segment the
analyzer is on
Selectable if Set IP Address = Manually
Default Gateway
Address to a gateway for routing to another network