B&K 2250 Light, Руководство пользователя

Страница: 123 / 208

CHAPTER 12
Signal Recording (Optional Module)
113
Note: When selecting an interval for storing (or setting a marker), the profile display freezes,
but the signal recording is still updated in the internal buffer. The part of the buffer available on
the screen will decrease and you will see the small triangle move to the right. Be sure not to
wait too long in selecting the
Sound marker from the drop-down menu – otherwise the signal
recording will disappear from the internal buffer.
12.2.4 Playing the Recording
a
With your G4 2250 Light, you can playback the sound simply by selecting part of the marker –
as described in section 11.3.3 – and choose
Play Sound from the resulting drop-down menu.
The following drop-down menu will then appear, see Fig.12.2.
Fig.12.2
Playing the recording –
the drop-down menu
Select one of the four ways of playing a sound: Selection will play the part you have selected;
Repeat Selection will play the selected part until you press Cancel on the pop-up menu; To End
will play the sound from the position you selected the sound marker to the end; and finally All
will play the entire signal recording, regardless of your selection point.
a. Playback on the analyzer is available only with hardware version 4. If you have hardware versions 1 – 3,
you can play back recordings on a PC using Measurement Partner Suite BZ-5503. See section 12.2.5 for
more information.