manualshive.com logo in svg

B&G Vulcan, Руководство оператора

Поделиться
Скачать
B&G Vulcan Скачать руководство пользователя страница 84

Filename

Specify the name of the recording (log).

File format

Select a file format from the drop-down, slg (Echosounder only), xtf
(DownScan only*), or sl2 (Echosounder and DownScan).

Ú

Note: 

XTF format is for use only with select 3rd party

Echosounder viewing tools.

Save to

Select whether the recording is to be saved internally or to a
memory card in the card reader.

Time remaining

Shows the remaining allocated space available for recordings.

Viewing the recorded sounder data

Both internally and externally stored sounder records may be
reviewed when selected.
The log file is displayed as a paused image, and you control the
scrolling and display from the replay menu option.
You can use the cursor on the replay image, and pan the image as
on a normal echo image.
If more than one channel was recorded in the selected echo file,
you can select which channel to display.

84

Echosounder

| Vulcan Operator Manual

Содержание Vulcan































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды