B&G Vulcan Скачать руководство пользователя страница 64

Страница: 64 / 126

Data fields

The following abbreviations are used in the autopilot panel:

CTS

Course to steer

DTD

Distance to destination

WPT DIST

Distance to next waypoint

SOG

Speed over ground

COG

Course over ground

XTE

Cross track error (L: left or R: right)

Mode overview

The autopilot has several steering modes. The number of modes
and features within the mode depend on boat type and available
inputs, as shown in the following list:

•

Standby

Standby mode used when manually steering at the helm.
Compass and rudder angle is shown on the display.

•

NFU

Non-Follow Up steering where the rudder movement is
controlled by using the Port and Starboard keys in the Pilot
pop-up, or by another NFU unit.

•

Follow-up steering where the rudder angle is set by another FU
unit.

•

AUTO

Automatic steering where the set heading is maintained.

•

Heading capture

Aborts the turn and uses the instantaneous compass
reading as set heading.

•

Turn patterns

Moves the vessel automatically in pre-defined turn steering
patterns.

•

Tacking

Only available if the boat type is set to Sail in the Autopilot
Commissioning dialog. Tacking with a fixed angle.

•

NoDrift

Autopilot

| Vulcan Operator Manual

Содержание Vulcan































































































































Результаты поиска

Содержание Vulcan

Отзывы:

Бренды по названию

Популярные бренды

B&G Vulcan, Руководство оператора

Результаты поиска

Содержание Vulcan

Отзывы:

Бренды по названию

Популярные бренды