B&G Vulcan, Руководство оператора

Страница: 19 / 126

First time startup
The first time the unit is started and after a master reset, the system
runs through an automatic start-up sequence, including language
setup and automatic data source selection.
You can select to interrupt this sequence and later configure the
system yourself.
Standby mode
You select Standby mode from the
System Controls
dialog.
Display illumination
Brightness
The display backlighting can be adjusted at any time from the
System Controls
dialog. You can also cycle the preset backlight
levels by short presses on the
Power
key.
Night mode
The night mode option optimizes the color palette and backlight for
low light conditions.
Ú
Note:
Details on the chart may be less visible when the
Night mode is selected!
Locking the touchscreen
You can temporarily lock a touchscreen to prevent accidental
operation of the system. Lock the touchscreen when large amounts
of water are on the screen, for example, in heavy seas and weather.
This feature is also useful when cleaning the screen while the unit is
turned on.
You lock the touchscreen from the
System Controls
dialog.
You remove the lock function by a short press on the
Power
key.
Basic operation | Vulcan Operator Manual
19