manualshive.com logo in svg

B&G Vulcan, Руководство оператора

Поделиться
Скачать
B&G Vulcan Скачать руководство пользователя страница 28

* Optional chart items. You turn the optional images on/off
individually from the Chart settings dialog.

Chart data

The system is delivered with different embedded cartography
depending on region.
All units support Insight charts from Navico including Insight
Genesis. The system also supports Navionics Gold, P and
Na, C-MAP MAX-N/MAX-N+ by Jeppesen as well as content
created by variety of third party mapping providers in the AT5
format. For a full selection of available charts please visit
insightstore.navico.com, c-map.jeppesen.com or navionics.com.

Ú

Note: 

The system does not automatically switch to

embedded cartography if the chart card is removed. A low-
resolution chart will be displayed until you re-insert the
card or manually switch back to the embedded
cartography.

Showing dual chart types

If you have different chart types available - embedded or in the card
slot - you can show two different chart types simultaneously on a
page with two chart panels.
You can select a dual chart panel by pressing and holding the Chart
application button on the 

Home

 page, or by creating a favorite

page with two chart panels.

28

Charts

 | Vulcan Operator Manual

Содержание Vulcan































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды