manualshive.com logo in svg

B&G Vulcan, Руководство оператора

Поделиться
Скачать
B&G Vulcan Скачать руководство пользователя страница 42

The following settings are available:

•

Boat

Displays laylines from boat, indicating the target course.

•

Always show boat laylines

Displays boat laylines.

•

Mark

Displays laylines from mark/waypoint, indicating the target
course to sail to reach the mark/waypoint.

•

Tidal flow correction

Calculates the tidal effect of the boat based on COG, and
applies this information to the laylines.

•

Overlapped

Extends the laylines beyond the tack/gybe intersection.

•

Length

Sets the length of the laylines.

•

Target wind angle

Defines the target for the TWA (True Wind Angle). The target
can be read from your polar table, it can be read from the live
measurements, or it can be manually entered upwind and
downwind sailing angles.

•

Limits

Sets the maximum tack/gybe time period to either side of the
laylines. When turned on the limits are indicated with a dotted
line on the chart and on the SailSteer panel.

Synchronize 2D/3D chart

Links the position shown on one chart with the position shown on
the other chart when a 2D and a 3D chart are shown side by side.

42

Charts

 | Vulcan Operator Manual

Содержание Vulcan































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды