![background image](http://html1.mh-extra.com/html/bandb-armr/4x0e-series/4x0e-series_installation-manual_3068883016.webp)
Installation and Operations Manual
— Model 400E Series
18
B&B ARMR
A Division of B&B Roadway and Security Solutions 0400E-9001 Rev J
Drive Stanchion Manual Drive Procedure
Serious injury may occur if electrical power resumes during this
procedure.
Do not alter or defeat safety Proximity Lockout Sensor (6). The Proximity
Lockout Sensor is design to prevent accidental operation of the motor if
power resumes during the use of the Manual Override Tool.
Do not position any part of your body in the pathway of moving.
1.
Locate the electric Drive Motor underneath the 450E Gate Drive Beam (7).
2.
Load the Manual Override Tool (8) into the cordless drill and align tool over the
Motor Shaft (9), located inside the large of the Motor Shroud (10)
3.
Assure that the Manual Override Tool is consistently engaged with the Motor
Shaft and operate the drill for several minutes until Gate is in the desired position.