manualshive.com logo in svg
background image

Installation and Operations Manual 

— Model 400E Series 

 

iv 

B&B ARMR

                                                                                                                  

A Division of B&B Roadway and Security Solutions                                                                                                 0400E-9001 Rev J 

 

 

 

INTRODUCTION 

Welcome! 

Congratulations on your purchase of a B&B ARMR vehicle barrier.  In addition to 
providing detailed operating instructions, this manual describes how to install, maintain, 
and troubleshoot your vehicle barrier.   If you require additional assistance with any 
aspect of your vehicle barrier's installation or operation, please contact us.  
 
With years of experience in all aspects of perimeter security and related disciplines, our 
products are used throughout the world to control access and to protect people, 
equipment, and facilities. We offer a broad range of vehicle barrier and related security 
services: 

 

Routine barrier preventative maintenance or emergency repairs (including 
work on non-B&B ARMR products) 

 

Spare or replacement parts 

 

Custom designs or special installations 

 

Equipment upgrades (modernize your old equipment with state-of-the-art 
systems) 

 

Technical support via telephone and possible on site support with 
advanced scheduling. 

 

Safety 

Your safety is important to us. If you have any questions or are in doubt about any aspect of 
the equipment, please contact us. While B&B ARMR does not assume responsibility for 
injury to persons or property during installation, operation, or maintenance, we can provide 
verbal guidance, additional written instructions, or the services of a factory engineer. We're 
here to help you operate your vehicle barrier safely and effectively. 

As the user, you are responsible for correct and safe installation, operation, and maintenance 
of this equipment. Users must follow the specific instructions and safety precautions located 
in this manual. In addition they must: 

Be aware of and follow the safety standards of the Occupational Safety and 
Health Administration (OSHA), as well as other applicable federal, state, and 
local safety regulations and industry standards and procedures. For installation 
outside the United States, users must also follow applicable international, 
regional, and local safety standards. 

 

 

Your safety is extremely important to us.  If you have any 
questions or are in doubt about any aspect of the equipment, 
please contact us. 

Содержание 4X0E Series

























Отзывы: